面料越厚越好，越厚越贵不是厚的面料就好，40×40的面料明显比60×40的厚，厚的面料在很多时候没有舒适感。面料厚度与纱的粗细有很大关系，具体来说，是以其纤维支数来分辨的。

The thicker the fabric is, the more expensive the thicker the fabric is. It is not a thick fabric. 40 × The fabric of 40 is obviously better than that of 60 × 40 thick, thick fabric is not comfortable in many times. Fabric thickness has a great relationship with yarn thickness, specifically, it is determined by its fiber count.

面料支数是指一平方英寸的面料中纱线的数量，叫英支，简称S。支数跟纱的长度和重量有关。打个比方，一两棉花做成30根长度为1米的纱，那就是30支；一两棉花做成40根长度为1米的纱，那就是40支。所以支数越高，面料就越柔软、越强韧，面料相对薄，做出来的面料质量就越好。

Fabric count refers to the number of yarns in a square inch of fabric, called English count, or S. The count is related to the length and weight of yarn. For example, one or two cotton can be made into 30 pieces of yarn with a length of 1 meter, which is 30 pieces; One or two cotton is made into 40 pieces of yarn with a length of 1 meter, which is 40 pieces. So the higher the count, the softer and stronger the fabric, the thinner the fabric, and the better the quality of the fabric.

显然支数越高纱越细，对设备的要求就越高，对原料棉花的品质就越高，每吨纱的价格就越贵，随之布的成本也越高。支数，是衡量纱粗细的重要指标。支数大了，纱就细了，每平方英寸排列的纱肯定就越多，所以同样支数的床品，密度越高的越好，高支才能高密，这也就是我们经常听说的“高支高密”面料这一说法。所以布草面料越厚越好，越厚越贵不对。

Obviously, the higher the count, the finer the yarn, the higher the requirements for equipment, the higher the quality of raw cotton, the higher the price per ton of yarn, and the higher the cost of cloth. The count is an important index to measure the yarn size. The larger the count, the thinner the yarn, and the more yarn will be arranged per square inch. Therefore, the higher the density of the same count of bedding, the better, the higher the count, the higher the density. This is what we often hear about "high count and high density" fabric. So the thicker the linen fabric, the better, the thicker the more expensive.

有挺括感的面料好宾馆被罩、床单、枕套等酒店布草在正规的洗涤公司洗涤后，都会作上浆处理。上浆的目的是增加面料的抗污性，阻止污垢渗透到纤维内部，在污垢与织物间产生“隔离层”，同时被污染的被套床单在洗涤时易于去除污垢。

The fabric with a crisp feeling is good. Hotel linen such as hotel quilt covers, bed sheets, pillowcases, etc. will be starched after being washed by a regular washing company. The purpose of sizing is to increase the stain resistance of the fabric, prevent the dirt from penetrating into the fiber, create a "separation layer" between the dirt and the fabric, and at the same time, the contaminated quilts and sheets are easy to remove the dirt when washing.

上浆的另外一个目的是增加面料的挺括度，防止纤维起毛，有良好的感观。如果面料的纱支密度不达标，就会通过上浆方式增加布料的所谓厚度，但是这个厚度和挺括度是暂时的，下水后就没有了。

Another purpose of sizing is to increase the stiffness of the fabric, prevent fiber fuzzing, and have a good feeling. If the yarn count density of the fabric is not up to the standard, the so-called thickness of the fabric will be increased by sizing, but this thickness and stiffness are temporary, and will not be available after water.

很多厂家的面料坯布在漂白整理厂的后一道工序也是上浆，原因是面料的纱支密度不能达到标准。但我们的面料纱支密度是达标的，不用作上浆处理，而是加柔软剂，柔软剂的成本远远高于浆料的价格。所以有挺括感的面料不一定好。

The fabric grey fabric of many manufacturers is also sized in the last process of the bleaching and finishing plant, because the yarn count density of the fabric cannot meet the standard. However, the yarn count density of our fabric is up to standard. Instead of sizing, we add softener. The cost of softener is far higher than the price of size. So the fabric with a crisp feeling is not necessarily good.

面料很亮，是化纤的什么是丝光，所谓丝光整理，就是指棉织品经过浓烧碱处理后，使面料表面的毛头熔掉，纱线里的纤维收缩，然后洗去烧碱的过程。通过处理，棉纤维的形态发生变化，对于光线的反射变得有规律了许多，棉纤维的表面变得十分有光泽。丝光是整理过程的一道工序，与面料材质无关。不具备丝光设备的工厂，用的是轧光工艺，轧光机由若干只表面光滑的硬辊和软辊组成，织物经过硬、软辊组合轧压后，纱线被压扁，表面平滑，光泽增强，手感硬挺。但是面料光泽效果耐久性差，几次下水后会逐渐失去光泽。

The fabric is very bright. What is chemical fiber mercerizing? The so-called mercerizing finishing refers to the process that the wool on the surface of the fabric melts off, the fibers in the yarn contract, and then the caustic soda is washed away after the cotton fabric is treated with concentrated caustic soda. Through treatment, the shape of cotton fiber changes, the reflection of light becomes more regular, and the surface of cotton fiber becomes very shiny. Mercerizing is a process in the finishing process, which has nothing to do with the fabric material. The factory without mercerizing equipment uses the calendering process. The calender is composed of several smooth hard and soft rollers. After the fabric is rolled by the combination of hard and soft rollers, the yarn is flattened, the surface is smooth, the luster is enhanced, and the handle is stiff. However, the durability of fabric gloss effect is poor, and it will gradually lose luster after several times of water.

压光是机械物理性处理，而丝光是化学处理，是两码事。所以某些客户认为面料亮，薄，是化纤的，这其实是错误的。同样的面料，丝光的要比轧光的贵。

Calendering is a mechanical and physical treatment, while mercerizing is a chemical treatment, which is two different things. So some customers think that the fabric is bright, thin and chemical fiber, which is actually wrong. The same fabric, mercerized is more expensive than calendered.

酒店的布草采购中，分辨一款面料的好坏，一要看纱支密度，高支高密的面料肯定好。二是看整理工艺，好的面料是经过了烧毛、丝光等一系列的整理工艺，价格也更贵。重要的一点：选择宾馆酒店布草时一定要选择品质有保障，售后服务有保障的厂家，让您的钱花的物有所值。更多相关内容就来我们网站http://www.jnadx.com咨询！

In the purchase of linen in the hotel, the quality of a fabric depends on the yarn count density. The fabric with high count and high density must be good. Second, look at the finishing process. Good fabrics have undergone a series of finishing processes such as singeing and mercerizing, and the price is also more expensive. An important point: When choosing hotel linen, you must choose a manufacturer with guaranteed quality and after-sales service to make your money worthwhile. Come to our website for more relevant content http://www.jnadx.com consulting service